AI辅助学习
084.1 AI辅助学习
/* ==================== Delay\delay.c ==================== */
#include "delay.h"
#include <intrins.h>
void Delay_xms(uint xms) //@11.0592MHz
{
uchar data i, j;
while(xms)
{
_nop_();
i = 2;
j = 199;
do
{
while (--j);
} while (--i);
xms--;
}
}
void Delay5us(void) //@11.0592MHz
{
}
void Delay30us(void) //@11.0592MHz
{
unsigned char data i;
i = 11;
while (--i);
}
/* ==================== Delay\delay.h ==================== */
#ifndef _DELAY_H_
#define _DELAY_H_
#include "main.h"
void Delay_xms(uint xms);
void Delay5us(void);
void Delay30us(void);
#endif
/* ==================== DHT11\dht11.c ==================== */
#include "dht11.h"
#include "main.h"
#include "delay.h"
#include <intrins.h>
unsigned char DHT11_Start(void)
{
unsigned char count = 0;
DHT11_IO = 1;
Delay30us();
DHT11_IO = 0;
Delay_xms(20);
DHT11_IO = 1;
Delay30us();
while(!DHT11_IO && count < 80)
{
_nop_();
count++;
}
if(count >= 80)
return 1;
count = 0;
while(DHT11_IO && count < 80)
{
_nop_();
count++;
}
if(count >= 80)
return 1;
return 0;
}
unsigned char DHT11_Read(unsigned char * humi, unsigned char * temp )
{
unsigned char dht_buf[5] = {0};
unsigned char x,y,data_bit,data_byte,count = 0;
if(1 == DHT11_Start())
{
return 1;
}
for(x=0; x<5; x++)
{
for(y=0; y<8; y++)
{
while(!DHT11_IO && count < 80)
{
_nop_();
count++;
}
if(count >= 80)
return 1;
count = 0;
Delay30us();
if(1 == DHT11_IO)
{
data_bit = 1;
while(DHT11_IO && count < 80)
{
_nop_();
count++;
}
if(count >= 80)
return 1;
count = 0;
}
else
{
data_bit = 0;
}
data_byte = data_byte << 1;
data_byte |= data_bit;
}
dht_buf[x] = data_byte;
}
if(dht_buf[0] + dht_buf[1] + dht_buf[2] + dht_buf[3] == dht_buf[4])
{
*humi = dht_buf[0];
*temp = dht_buf[2];
}
else
{
return 1;
}
return 0;
}
/* ==================== DHT11\dht11.h ==================== */
#ifndef _DHT11_H_
#define _DHT11_H_
//#include "main.h"
unsigned char DHT11_Start(void);
unsigned char DHT11_Read(unsigned char * humi, unsigned char * temp );
#endif
/* ==================== IIC\iic.c ==================== */
#include "iic.h"
#include "main.h"
#include "delay.h"
void IIC_Start(void)
{
IIC_SCL = 1;
IIC_SDA = 1;
Delay5us();
IIC_SDA = 0;
Delay5us();
IIC_SCL = 0;
}
void IIC_Stop(void)
{
IIC_SCL = 1;
IIC_SDA = 0;
Delay5us();
IIC_SDA = 1;
}
void IIC_Send_Byte(unsigned char IIC_Byte)
{
char i;
for(i = 0; i<8; i++)
{
IIC_SDA = IIC_Byte & (0x80 >> i);
IIC_SCL = 1;
Delay5us();
IIC_SCL = 0;
Delay5us();
}
}
unsigned char IIC_Recv_Ack(void)
{
unsigned char ack;
IIC_SDA = 1;
IIC_SCL = 1;
Delay5us();
ack = IIC_SDA;
IIC_SCL = 0;
Delay5us();
return ack;
}
/* ==================== IIC\iic.h ==================== */
#ifndef _IIC_H_
#define _IIC_H_
void IIC_Start(void);
void IIC_Stop(void);
void IIC_Send_Byte(unsigned char IIC_Byte);
unsigned char IIC_Recv_Ack(void);
#endif
/* ==================== Key\key.c ==================== */
#include "key.h"
#include "delay.h"
uchar Key_Scan(void)
{
if(0 == KEY1)
{
Delay_xms(20);
while(0 == KEY1);//while(1);松手检查
Delay_xms(20);
return 1;
}
if(0 == KEY2)
{
Delay_xms(20);
while(0 == KEY2);//while(1);松手检查
Delay_xms(20);
return 2;
}
return 0;
}
/* ==================== Key\key.h ==================== */
#ifndef _KEY_H_
#define _KEY_H_
#include "main.h"
uchar Key_Scan(void);
#endif
/* ==================== main.c ==================== */
#include "reg52.h"
#include <intrins.h>
#include "delay.h"
#include "main.h"
#include "uart.h"
#include "oled.h"
#include "dht11.h"
#include <stdio.h>
#include "timer.h"
#include "key.h"
uchar PWM_Count = 0,level = 0,key_num;
void main()
{
// UART_Init();
PWM_IO = 0;
Timer0_Init();
OLED_Init(); //初始化OLED
OLED_Clear();
OLED_ShowString(23, 0,"SG90 Test", 16);
OLED_ShowString(0, 2,"Level:", 16);
while(1)
{
key_num = Key_Scan();
if(1 == key_num)
{
level++;
if(level >4)
level = 4;
}
if(2 == key_num)
{
if(level>0)
level--;
}
OLED_ShowNum(48,2,level,2,16);
}
}
void Timer0_Routine(void) interrupt 1
{
TH0 = 0XFE;
TL0 = 0X33;//0xFE33;
PWM_Count++;
PWM_Count = PWM_Count%40;
if(PWM_Count <= level)
{
SG90_IO = 1;
}
else
{
SG90_IO = 0;
}
}
/* ==================== main.h ==================== */
#ifndef _MAIN_H_
#define _MAIN_H_
#include "reg52.h"
typedef unsigned char uchar;
typedef unsigned int uint;
extern uchar recv;
sbit LED1 = P1^0;
sbit LED2 = P1^1;
sbit LED3 = P1^2;
sbit LED4 = P1^3;
sbit BEEP = P1^6;
sbit JDQ1 = P2^0;
sbit KEY1 = P3^2;
sbit KEY2 = P3^3;
sbit IIC_SCL = P1^5;
sbit IIC_SDA = P1^4;
sbit DHT11_IO = P1^2;
sbit PWM_IO = P1^0;
sbit SG90_IO = P2^0;
#endif
/* ==================== OLED\oled.c ==================== */
#include "oled.h"
#include "oledfont.h"
#include "iic.h"
//OLED的显存
//存放格式如下.
//[0]0 1 2 3 ... 127
//[1]0 1 2 3 ... 127
//[2]0 1 2 3 ... 127
//[3]0 1 2 3 ... 127
//[4]0 1 2 3 ... 127
//[5]0 1 2 3 ... 127
//[6]0 1 2 3 ... 127
//[7]0 1 2 3 ... 127
void delay_ms(unsigned int ms)
{
unsigned int a;
while(ms)
{
a=1800;
while(a--);
ms--;
}
return;
}
/**********************************************
//IIC Start
**********************************************/
//void IIC_Start()
//{
// OLED_SCLK_Set() ;
// OLED_SDIN_Set();
// OLED_SDIN_Clr();
// OLED_SCLK_Clr();
//}
/**********************************************
//IIC Stop
**********************************************/
//void IIC_Stop()
//{
// OLED_SCLK_Set() ;
// //OLED_SCLK_Clr();
// OLED_SDIN_Clr();
// OLED_SDIN_Set();
//
//}
//void IIC_Wait_Ack()
//{
// OLED_SCLK_Set() ;
// OLED_SCLK_Clr();
//}
/**********************************************
// IIC Write byte
**********************************************/
//void Write_IIC_Byte(unsigned char IIC_Byte)
//{
// unsigned char i;
// unsigned char m,da;
// da=IIC_Byte;
// OLED_SCLK_Clr();
// for(i=0;i<8;i++)
// {
// m=da;
// // OLED_SCLK_Clr();
// m=m&0x80;
// if(m==0x80)
// {OLED_SDIN_Set();}
// else OLED_SDIN_Clr();
// da=da<<1;
// OLED_SCLK_Set();
// OLED_SCLK_Clr();
// }
//}
/**********************************************
// IIC Write Command
**********************************************/
void Write_IIC_Command(unsigned char IIC_Command)
{
IIC_Start();
IIC_Send_Byte(0x78); //Slave address,SA0=0
IIC_Recv_Ack();
IIC_Send_Byte(0x00); //write command
IIC_Recv_Ack();
IIC_Send_Byte(IIC_Command);
IIC_Recv_Ack();
IIC_Stop();
}
/**********************************************
// IIC Write Data
**********************************************/
void Write_IIC_Data(unsigned char IIC_Data)
{
IIC_Start();
IIC_Send_Byte(0x78); //D/C#=0; R/W#=0
IIC_Recv_Ack();
IIC_Send_Byte(0x40); //write data
IIC_Recv_Ack();
IIC_Send_Byte(IIC_Data);
IIC_Recv_Ack();
IIC_Stop();
}
void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
if(cmd)
{
Write_IIC_Data(dat);
}
else
{
Write_IIC_Command(dat);
}
}
/********************************************
// fill_Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{
unsigned char m,n;
for(m=0;m<8;m++)
{
OLED_WR_Byte(0xb0+m,0); //page0-page1
OLED_WR_Byte(0x00,0); //low column start address
OLED_WR_Byte(0x10,0); //high column start address
for(n=0;n<128;n++)
{
OLED_WR_Byte(fill_Data,1);
}
}
}
/***********************Delay****************************************/
void Delay_50ms(unsigned int Del_50ms)
{
unsigned int m;
for(;Del_50ms>0;Del_50ms--)
for(m=6245;m>0;m--);
}
void Delay_1ms(unsigned int Del_1ms)
{
unsigned char j;
while(Del_1ms--)
{
for(j=0;j<123;j++);
}
}
//坐标设置
void OLED_Set_Pos(unsigned char x, unsigned char y)
{
OLED_WR_Byte(0xb0+y,OLED_CMD);
OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
OLED_WR_Byte((x&0x0f),OLED_CMD);
}
//开启OLED显示
void OLED_Display_On(void)
{
OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC命令
OLED_WR_Byte(0X14,OLED_CMD); //DCDC ON
OLED_WR_Byte(0XAF,OLED_CMD); //DISPLAY ON
}
//关闭OLED显示
void OLED_Display_Off(void)
{
OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC命令
OLED_WR_Byte(0X10,OLED_CMD); //DCDC OFF
OLED_WR_Byte(0XAE,OLED_CMD); //DISPLAY OFF
}
//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!
void OLED_Clear(void)
{
u8 i,n;
for(i=0;i<8;i++)
{
OLED_WR_Byte (0xb0+i,OLED_CMD); //设置页地址（0~7）
OLED_WR_Byte (0x00,OLED_CMD); //设置显示位置—列低地址
OLED_WR_Byte (0x10,OLED_CMD); //设置显示位置—列高地址
for(n=0;n<128;n++)
OLED_WR_Byte(0,OLED_DATA);
} //更新显示
}
void OLED_On(void)
{
u8 i,n;
for(i=0;i<8;i++)
{
OLED_WR_Byte (0xb0+i,OLED_CMD); //设置页地址（0~7）
OLED_WR_Byte (0x00,OLED_CMD); //设置显示位置—列低地址
OLED_WR_Byte (0x10,OLED_CMD); //设置显示位置—列高地址
for(n=0;n<128;n++)
OLED_WR_Byte(1,OLED_DATA);
} //更新显示
}
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示
//size:选择字体 16/12
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{
unsigned char c=0,i=0;
c=chr-' ';//得到偏移后的值
if(x>Max_Column-1)
{
x=0;
y=y+2;
}
if(Char_Size ==16)
{
OLED_Set_Pos(x,y);
for(i=0;i<8;i++)
OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
OLED_Set_Pos(x,y+1);
for(i=0;i<8;i++)
OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
}
else
{
OLED_Set_Pos(x,y);
for(i=0;i<6;i++)
OLED_WR_Byte(F6x8[c][i],OLED_DATA);
}
}
//m^n函数
u32 oled_pow(u8 m,u8 n)
{
u32 result=1;
while(n--)
{
result*=m;
}
return result;
}
//显示2个数字
//x,y :起点坐标
//len :数字的位数
//size:字体大小
//mode:模式 0,填充模式;1,叠加模式
//num:数值(0~4294967295);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2)
{
u8 t,temp;
u8 enshow=0;
for(t=0;t<len;t++)
{
temp=(num/oled_pow(10,len-t-1))%10;
if(enshow==0&&t<(len-1))
{
if(temp==0)
{
OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
continue;
}
else
enshow=1;
}
OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2);
}
}
//显示一个字符号串
void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 Char_Size)
{
unsigned char j=0;
while (chr[j]!='\0')
{
OLED_ShowChar(x,y,chr[j],Char_Size);
x+=8;
if(x>120){x=0;y+=2;}
j++;
}
}
//显示汉字
void OLED_ShowCHinese(u8 x,u8 y,u8 no)
{
u8 t,adder=0;
OLED_Set_Pos(x,y);
for(t=0;t<16;t++)
{
OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);
adder+=1;
}
OLED_Set_Pos(x,y+1);
for(t=0;t<16;t++)
{
OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);
adder+=1;
}
}
/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{
unsigned int j=0;
unsigned char x,y;
if(y1%8==0)
y=y1/8;
else
y=y1/8+1;
for(y=y0;y<y1;y++)
{
OLED_Set_Pos(x0,y);
for(x=x0;x<x1;x++)
{
OLED_WR_Byte(BMP[j++],OLED_DATA);
}
}
}
//初始化SSD1306
void OLED_Init(void)
{
OLED_WR_Byte(0xAE,OLED_CMD);//--display off
OLED_WR_Byte(0x00,OLED_CMD);//---set low column address
OLED_WR_Byte(0x10,OLED_CMD);//---set high column address
OLED_WR_Byte(0x40,OLED_CMD);//--set start line address
OLED_WR_Byte(0xB0,OLED_CMD);//--set page address
OLED_WR_Byte(0x81,OLED_CMD); // contract control
OLED_WR_Byte(0xFF,OLED_CMD);//--128
OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap
OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverse
OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)
OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 duty
OLED_WR_Byte(0xC8,OLED_CMD);//Com scan direction
OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset
OLED_WR_Byte(0x00,OLED_CMD);//
OLED_WR_Byte(0xD5,OLED_CMD);//set osc division
OLED_WR_Byte(0x80,OLED_CMD);//
OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode off
OLED_WR_Byte(0x05,OLED_CMD);//
OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge Period
OLED_WR_Byte(0xF1,OLED_CMD);//
OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartion
OLED_WR_Byte(0x12,OLED_CMD);//
OLED_WR_Byte(0xDB,OLED_CMD);//set Vcomh
OLED_WR_Byte(0x30,OLED_CMD);//
OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enable
OLED_WR_Byte(0x14,OLED_CMD);//
OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
}
/* ==================== OLED\oled.h ==================== */
//#include "REG51.h"
#ifndef __OLED_H
#define __OLED_H
//#include "sys.h"
//#include "stdlib.h"
#define u8 unsigned char
#define u32 unsigned int
#define OLED_CMD 0 //写命令
#define OLED_DATA 1 //写数据
#define OLED_MODE 0
//sbit OLED_SCL=P1^5;//时钟 D0（SCLK?
//sbit OLED_SDIN=P1^4;//D1（MOSI） 数据
//#define OLED_SCLK_Clr() OLED_SCL=0
//#define OLED_SCLK_Set() OLED_SCL=1
//#define OLED_SDIN_Clr() OLED_SDIN=0
//#define OLED_SDIN_Set() OLED_SDIN=1
//OLED模式设置
//0:4线串行模式
//1:并行8080模式
#define SIZE 16
#define XLevelL 0x02
#define XLevelH 0x10
#define Max_Column 128
#define Max_Row 64
#define Brightness 0xFF
#define X_WIDTH 128
#define Y_WIDTH 64
//-----------------OLED端口定义----------------
void delay_ms(unsigned int ms);
//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);
void OLED_Display_On(void);
void OLED_Display_Off(void);
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(u8 x,u8 y,u8 t);
void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size);
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(u8 x,u8 y,u8 no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void Delay_50ms(unsigned int Del_50ms);
void Delay_1ms(unsigned int Del_1ms);
void fill_picture(unsigned char fill_Data);
void Picture();
void IIC_Start();
void IIC_Stop();
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);
void IIC_Wait_Ack();
#endif
/* ==================== OLED\oledfont.h ==================== */
#ifndef __OLEDFONT_H
#define __OLEDFONT_H
//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:12*6
/************************************6*8的点阵************************************/
const unsigned char code F6x8[][6] =
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char code F8X16[]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
unsigned char code Hzk[][32]={
//{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00},
//{0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"中",0*/
//{0x40,0x40,0x40,0x5F,0x55,0x55,0x55,0x75,0x55,0x55,0x55,0x5F,0x40,0x40,0x40,0x00},
//{0x00,0x40,0x20,0x0F,0x09,0x49,0x89,0x79,0x09,0x09,0x09,0x0F,0x20,0x40,0x00,0x00},/*"景",1*/
//{0x00,0xFE,0x02,0x42,0x4A,0xCA,0x4A,0x4A,0xCA,0x4A,0x4A,0x42,0x02,0xFE,0x00,0x00},
//{0x00,0xFF,0x40,0x50,0x4C,0x43,0x40,0x40,0x4F,0x50,0x50,0x5C,0x40,0xFF,0x00,0x00},/*"园",2*/
//{0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00},
//{0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00},/*"电",3*/
//{0x80,0x82,0x82,0x82,0x82,0x82,0x82,0xE2,0xA2,0x92,0x8A,0x86,0x82,0x80,0x80,0x00},
//{0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"子",4*/
//{0x24,0x24,0xA4,0xFE,0xA3,0x22,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,0x00},
//{0x08,0x06,0x01,0xFF,0x00,0x01,0x04,0x04,0x04,0x04,0x04,0xFF,0x02,0x02,0x02,0x00},/*"科",5*/
//{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00},
//{0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"技",6*/
// 长(0) 春(1) 理(2) 工(3) 大(4) 学(5) 好(6) 好(7) 学(8) 习(9)
//{0x80,0x80,0x80,0x80,0xFF,0x80,0x80,0xA0,0x90,0x88,0x84,0x82,0x80,0x80,0x80,0x00},
//{0x00,0x00,0x00,0x00,0xFF,0x40,0x21,0x12,0x04,0x08,0x10,0x20,0x20,0x40,0x40,0x00},/*"长",0*/
///* (16 X 16 , 宋体 )*/
//{0x40,0x44,0x54,0x54,0xD4,0x54,0x74,0x5F,0x54,0x54,0xD4,0x54,0x54,0x44,0x40,0x00},
//{0x04,0x04,0x02,0x01,0xFE,0x92,0x92,0x92,0x92,0x92,0xFE,0x01,0x02,0x04,0x04,0x00},/*"春",1*/
///* (16 X 16 , 宋体 )*/
//{0x04,0x84,0x84,0xFC,0x84,0x84,0x00,0xFE,0x92,0x92,0xFE,0x92,0x92,0xFE,0x00,0x00},
//{0x20,0x60,0x20,0x1F,0x10,0x10,0x40,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x40,0x00},/*"理",2*/
///* (16 X 16 , 宋体 )*/
//{0x00,0x04,0x04,0x04,0x04,0x04,0x04,0xFC,0x04,0x04,0x04,0x04,0x04,0x04,0x00,0x00},
//{0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00},/*"工",3*/
///* (16 X 16 , 宋体 )*/
//{0x20,0x20,0x20,0x20,0x20,0x20,0x20,0xFF,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00},
//{0x80,0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x03,0x0C,0x10,0x20,0x40,0x80,0x80,0x00},/*"大",4*/
///* (16 X 16 , 宋体 )*/
//{0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00},
//{0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00},/*"学",5*/
///* (16 X 16 , 宋体 )*/
//{0x10,0x10,0xF0,0x1F,0x10,0xF0,0x00,0x80,0x82,0x82,0xE2,0x92,0x8A,0x86,0x80,0x00},
//{0x40,0x22,0x15,0x08,0x16,0x61,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00},/*"好",6*/
///* (16 X 16 , 宋体 )*/
//{0x10,0x10,0xF0,0x1F,0x10,0xF0,0x00,0x80,0x82,0x82,0xE2,0x92,0x8A,0x86,0x80,0x00},
//{0x40,0x22,0x15,0x08,0x16,0x61,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00},/*"好",7*/
///* (16 X 16 , 宋体 )*/
//{0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00},
//{0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00},/*"学",8*/
///* (16 X 16 , 宋体 )*/
//{0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00},
//{0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00},/*"习",9*/
///* (16 X 16 , 宋体 )*/
//温(0) 湿(1) 度(2) 检(3) 测(4) 系(5) 统(6)
{0x10,0x60,0x02,0x8C,0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00},
{0x04,0x04,0x7E,0x01,0x40,0x7E,0x42,0x42,0x7E,0x42,0x7E,0x42,0x42,0x7E,0x40,0x00},/*"温",0*/
/* (16 X 16 , 宋体 )*/
{0x10,0x60,0x02,0x8C,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00},
{0x04,0x04,0x7E,0x01,0x44,0x48,0x50,0x7F,0x40,0x40,0x7F,0x50,0x48,0x44,0x40,0x00},/*"湿",1*/
/* (16 X 16 , 宋体 )*/
{0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00},
{0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00},/*"度",2*/
/* (16 X 16 , 宋体 )*/
{0x10,0x10,0xD0,0xFF,0x90,0x50,0x20,0x50,0x4C,0x43,0x4C,0x50,0x20,0x40,0x40,0x00},
{0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x58,0x41,0x4E,0x60,0x58,0x47,0x40,0x40,0x00},/*"检",3*/
/* (16 X 16 , 宋体 )*/
{0x10,0x60,0x02,0x8C,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0xFF,0x00,0x00},
{0x04,0x04,0x7E,0x01,0x80,0x47,0x30,0x0F,0x10,0x27,0x00,0x47,0x80,0x7F,0x00,0x00},/*"测",4*/
/* (16 X 16 , 宋体 )*/
{0x00,0x00,0x22,0x32,0x2A,0xA6,0xA2,0x62,0x21,0x11,0x09,0x81,0x01,0x00,0x00,0x00},
{0x00,0x42,0x22,0x13,0x0B,0x42,0x82,0x7E,0x02,0x02,0x0A,0x12,0x23,0x46,0x00,0x00},/*"系",5*/
/* (16 X 16 , 宋体 )*/
{0x20,0x30,0xAC,0x63,0x30,0x00,0x88,0xC8,0xA8,0x99,0x8E,0x88,0xA8,0xC8,0x88,0x00},
{0x22,0x67,0x22,0x12,0x12,0x80,0x40,0x30,0x0F,0x00,0x00,0x3F,0x40,0x40,0x71,0x00},/*"统",6*/
/* (16 X 16 , 宋体 )*/
};
#endif
/* ==================== Timer\timer.c ==================== */
#include "timer.h"
#include "reg52.h"
void Timer0_Init(void)
{
TMOD &= 0xF0; //低四位清0 保留高四位
TMOD |=0x01;
TH0 = 0XFE;
TL0 = 0X33;//0xFE33;
TF0 = 0;
ET0 = 1;
EA = 1;
TR0 = 1;
}
/* ==================== Timer\timer.h ==================== */
#ifndef _TIMER_H_
#define _TIMER_H_
void Timer0_Init(void);
#endif
/* ==================== Uart\uart.c ==================== */
#include "uart.h"
#include "main.h"
//串口发送一个字节
void UART_Send_Byte(uchar send_byte)
{
SBUF = send_byte;
while(!TI);
TI=0;
}
//串口发送字符串
void UART_Send_Str(uchar *send_str)
{
while(*send_str != '\0') //判断字符串结束符，如果识别到‘\0',则跳出while，结束发送
{
UART_Send_Byte(*send_str++); //本质是一个字节一个字节的发送，
//发送完一个字节，地址+1，等待发送下一个字节，直到检测到字符串结束符为止
}
}
void UART_Init(void)
{
SCON = 0x50; //串口配成工作方式1
PCON &= 0x7F; //波特率不加倍
TMOD &= 0x0f;
TMOD |= 0x20; //定时器1，模式二，自动重装初值，串口按照一定速率发数据，需要用的定时器
TH1 = 0xFD;
TL1 = 0xFD; //@11.0592MH时钟，9600比特率定时器初值
TR1 = 1; //定时器开始运行
ES = 1; //串口中断打开
EA=1; //总中断打开
recv = 0;
}
/* ==================== Uart\uart.h ==================== */
#ifndef _UART_H_
#define _UART_H_
#include "main.h"
void UART_Send_Byte(uchar send_byte);
void UART_Send_Str(uchar *send_str);
void UART_Init(void);
#endif
一、抖音视频分析
AI 编程助手适合解释陌生代码、定位问题、补充注释、生成测试和提供重构思路，但输出不等于事实。学习时应把 AI 当作“候选方案生成器”，再用数据手册、编译结果、静态检查和板上实验验证。尤其是寄存器地址、引脚复用、电气参数和中断时序，不能仅凭语言模型回答直接接线或烧录。
更有效的学习闭环是：
flowchart LR
Q[描述目标和现象] --> C[提供最小相关代码与芯片型号]
C --> A[让 AI 解释或给候选方案]
A --> D[对照手册与原理图]
D --> B[编译并在板上测试]
B --> R[记录结果和原因]
R --> Q
1.1 VS Code安装
1.1.1 教学文档位置
课程资料中提供了 VS Code 安装包和说明，也可以直接从官方渠道获取当前版本。已有安装包适合复现实验环境；新装电脑更适合使用官网版本，并记录版本号，便于排查插件兼容问题。
1.1.2 VS Code官网
VS Code 官网为 https://code.visualstudio.com/。Windows 用户根据系统架构选择安装程序，不要从带有捆绑软件的第三方下载站获取。
1.1.3 安装注意事项
安装向导中的“添加到 PATH”和资源管理器右键菜单选项很实用：前者便于在终端使用 code 命令，后者便于直接打开工程目录。安装目录和工程目录尽量简短、稳定；嵌入式旧工具链对中文、空格或过长路径的兼容性可能较差。
1.1.4 设置中文
打开扩展视图（Ctrl+Shift+X），搜索并安装 Microsoft 发布的 Chinese (Simplified) Language Pack for Visual Studio Code，按提示切换显示语言并重启。扩展安装和管理的当前操作可参考 VS Code 官方扩展文档。
1.2 GitHub Copilot插件
GitHub Copilot 的界面和功能会随版本变化。当前使用需要 GitHub 账号及可用的 Copilot 方案；GitHub 提供功能受限的 Copilot Free，学校、组织或付费方案的权益以账号页面为准。安装与首次登录可参考 GitHub 官方快速入门。
1.2.1 复制插件名字
在扩展市场搜索 GitHub Copilot，核对发布者为 GitHub。不要只凭相似图标安装第三方扩展，也不必机械地安装多个同名扩展；当前 VS Code 和 Copilot 会按版本自动处理所需组件。
1.2.2 打开VS Code
用“打开文件夹”载入完整工程，而不是只打开一个 main.c。这样 AI 助手和语言服务才能看到头文件、宏定义与模块调用关系。提交问题前先选中最小相关代码，并说明编译器、芯片型号、时钟、接线和期望行为。
1.2.3 安装插件
按 Ctrl+Shift+X 打开扩展视图，搜索 GitHub Copilot，确认发布者后点击安装。安装入口也可通过命令面板或 VS Code Marketplace 打开；不同版本的按钮名称和侧栏图标可能不同。
1.2.4 登录
按界面提示在浏览器中授权 GitHub 账号，再回到 VS Code 检查状态。若授权失败，应先检查系统时间、代理策略、浏览器是否拦截回调以及账号是否具有使用资格，不要下载来历不明的登录补丁。
1.2.5 应用案例
AI 可以回答“这段代码做什么”“这里有什么边界问题”“怎样降低重复刷新”“请只给出建议，不直接改代码”等问题。提问越具体，越容易得到可验证的答案。例如：
这是 STC89C52 的舵机 PWM 程序，按 11.0592 MHz、传统 12T 定时器推算，每次溢出约为 500 μs。请根据现有变量范围分析实际脉宽、周期和角度映射，并指出中断与主循环共享变量是否需要
volatile。不要假设未提供的硬件参数。
1.2.5.1 例题: 舵机实验演示代码优化
标题下的完整源码是课程演示所打开的舵机工程。审阅时应先确认行为，再谈代码风格：
定时器从 0xFE33 计数到 0xFFFF，共有 461 个计数。按 11.0592 MHz 晶振和传统 8051 的 12T 计时推算，一次中断约 500 μs；PWM_Count%40 得到约 20 ms 的 PWM 周期。判断条件是 PWM_Count<=level，所以 level=0～4 对应的高电平脉宽约为 0.5、1.0、1.5、2.0、2.5 ms。这个推导比仅让 AI 说“代码控制舵机”更有价值，也能检查回答是否真的使用了源码参数。
- 用
MIN_LEVEL、MAX_LEVEL代替散落的边界常量，能让档位范围更直观。 - OLED 固定文字在初始化阶段显示，变化的
level只在按键事件发生后刷新，能减少 I²C 占用。 - 定时器中断与主循环共同访问的状态量宜使用
volatile，多字节共享变量还要考虑读写原子性。 - AI 建议若改变了定时器周期、PWM 极性或舵机脉宽，必须重新推导并用示波器或逻辑分析仪验证。
不要一键采纳整段重构。先看差异，再逐小段编译；最后测试最小档、最大档、连续按键和复位后的默认状态。
1.3 MarsCode AI插件
1.3.1 安装插件
MarsCode Extension 已更名为 Trae Plugin。在 VS Code 扩展视图中搜索 Trae，核对发布者和扩展详情后安装；当前名称、下载入口和安装说明可查看 MarsCode/Trae 官方扩展页。旧视频中的名称和图标可用于辨认历史界面，不宜当作当前唯一入口。
1.3.2 登录
安装后按扩展提示完成账号登录和授权。若侧栏没有出现图标，可先执行“Developer: Reload Window”或重启 VS Code，再检查扩展是否启用、工作区是否处于受限模式。
无论使用哪种助手，都不要提交私钥、密码、令牌、未公开的商业源码或包含个人信息的日志。上传代码前应先确认组织的数据策略和插件权限。
1.3.3 应用案例
Trae 类助手可在编辑器中解释函数、生成注释、补全代码、提出修复建议或生成测试。它与编译器的职责不同：助手生成文本，编译器检查语法和类型，测试验证行为，真机验证时序与电气结果。
1.3.3.1 例题: 测试文件编写示例
生成测试时要明确可测试边界。单片机 GPIO、定时器和中断不能在普通电脑测试中直接运行，通常先把纯逻辑抽出来，例如将“按键输入如何更新档位”写成无硬件依赖的函数，再测试：
| 用例 | 初始值 | 操作 | 期望值 |
|---|---|---|---|
| 下边界 | 0 | 减 1 | 仍为 0 |
| 中间值 | 2 | 加 1 | 3 |
| 上边界 | 4 | 加 1 | 仍为 4 |
| 多次操作 | 1 | 连续加 5 次 | 不超过 4 |
对寄存器和 GPIO 的部分可用桩函数模拟，但最终仍需硬件在环测试，确认 PWM 频率、舵机角度和按键抖动等真实现象。
1.4 使用习惯
建议形成以下习惯：先自己描述问题和做初步推导，再让 AI 检查；一次只给必要上下文；要求回答列出假设和验证步骤；对关键结论追到芯片手册或官方文档；每次只接受可理解、可回退的小改动；保留版本控制记录。
“能生成代码”不等于“已经学会”。能够解释每个引脚、电平、时间参数和失败现象，才说明真正掌握了实现。
1.5 ChatGPT官网
ChatGPT 的官方学习入口是 OpenAI Learn，可用于了解对话式学习、头脑风暴和规划等基本用法。访问能力、账号要求、可用模型和功能可能随地区、时间及方案变化，应以官方页面实际显示为准。
提问嵌入式问题时，可使用“芯片型号 + 工具链 + 完整报错 + 最小代码 + 接线 + 已验证事实”的格式。对于电路连接和绝对最大额定值，回答只能作为线索，最终结论必须回到原理图和器件数据手册。
二、思维导图
mindmap
root((AI 辅助学习))
环境
VS Code
官方扩展
账号与权限
提问
芯片型号
最小代码
报错与现象
接线和时钟
验证
数据手册
编译与静态检查
仿真或逻辑分析仪
真机实验
安全
不上传密钥
不泄露私有源码
不盲目采纳